Chongqing Rexon Oil Purification Co., Ltd

TY-150 vacuum oil purifier is a vacuum dehydration system (complete removal of emulsified water, dissolved water) and three-stage filter together to remove impurities, combined with another coalescing filter (quickly remove a large amount of free water), completely remove all contaminants in the oil, purify the oil, clean the oil. After treatment, the parameters and quality of the final oil are improved, very close to the standard of the new oil. Vacuum gasoline separator - TYA series Made in China, SGS audited GB / TI9001: 2000 - iso9001: 2000 1. Vacuum oil separator 2. Dehydrate and remove impurities 3. Vacuum oil injection 4. Dual infrared liquid level automatic control Product Introduction: The product is used in power units to treat low-quality turbine oils, especially those with severe emulsification. The product adopts original nanomolecular purification technology, which integrates dehydration, degassing impurities and demulsification. Peculiarity: 1. Adopt advanced nanomolecular purification technology. 2. Completely break the emulsification with polymer materials. 3. Dehydration is very effective for one and two steps dehydration method. It can completely remove liquid water, 100% free water, 80% dissolved water. 4. The machine adopts unique impurity removal technology, through double-jump hydrogen trapezoidal mesh filtration and polymer material absorption, so that the β 3≥200, the cleanliness is lower than 6 (NAS1638). 5. With trapezoidal, spiral, automatic backwash system. 6. With advanced dielectric condensing device. 2. TY-100 emulsion turbine oil separator (100LPM) TY series vacuum turbine oil purifier / turbine oil recovery / turbine oil recovery / turbine oil regeneration / turbine oil purification It is used to treat unqualified turbine oils, especially severely emulsified turbine oils. Application: It is used to treat unqualified turbine oils, especially severely emulsified turbine oils. This product can quickly and effectively remove water, gas, impurities in oil, and can quickly break emulsification. According to the characteristics of high water content, easy emulsification and high impurity content of turbine oil, it is restored to the nature of new oil. Peculiarity: 1. Completely break the emulsification with polymer polymer materials. 2. Dehydration is a very effective one- and two-step dehydration method. It can completely remove liquid water, free water and 80% dissolved water in water. 3. The machine adopts unique impurity removal technology, filtered through double-hopping ladder network, absorbed by polymer materials, so that ß3≥200, cleanliness is lower than 6 (NAS1638). 4. With trapezoidal, spiral, automatic backwash system. 5. With advanced dielectric condensing device. 6. Online oil purification can be carried out automatically by water turbine or water turbine without any personnel. Advantage: The machine completely breaks the emulsification, and it is difficult to emulsify the oil after treatment. Large dehydration and online water absorption. TY series, prevent damage to the lubrication system, effectively extend the service life of the oil, and protect the turbine and other machinery.