ISONEM PAINT AND INSULATION TECHNOLOGIES

THERMAL PAINT is an elastomeric resin-based, contains special vacuum microspheres, have vapor-permeability, water-based, a low thermal conductivity, high sunlight absorbency, and high surface heat transmission value. Its activity is scientically proved special insulating paint which provides the thermal and water insulation in the interior and exterior facades. It provides energy savings to buildings of up to 40% depending on the application layers number in heating and cooling energy costs. When the ISONEM THERMAL PAINT with special vacuum microspheres is used as interior wall paint, it reects the radiant heat generated inside to the interior environment, and when it is used on the exterior, the incoming radiant heat is reected back to the outside. When used on roofs, it reects a minimum 80% of the sun's rays thanks to its ceramic-reinforced formula. While the water never passes from the lm surface applied Isonem Thermal Paint, the moisture inside the building evaporates away from the structure. PROPERTIES · Radiant heat proof, saves up to 40% energy. · Applicable to internal and external surfaces, labor costs are low and easy to apply. · It prevents the formation of moisture and mold in the wall. · It has water and sound insulation feature. · It has late ammability and nonammability. APPLICATION INFORMATION Surface preparation: Surfaces to be applied should be free of dirt, oil, paste, grease, loose parts and other foreign materials. The appropriate primer selection for surface is made according to the following table. ISONEM UNIVERSAL PRIMER (1: 7 diluted with water - 1 part primer, 7 part water) insulation and paint primer should be applied one layer with 100 - 200 g/m² consumption. The primer is then allowed to dry for 4 hours.In steel/metal surfaces, the surfaced should be primed with ISONEM Anti Rust Primer (Anticorrosive primer), consumption of 0,250 - 0,350 kg/m². Application method: ISONEM THERMAL PAINT must be mixed thoroughly before use.In exterior applications, 2 to 3 coats can be applied by roller or brush without diluting the product. In interior applications, it should be applied as 1 or 2 coats according to color and hiding power. It is recommended to apply 2 - 3 coats in roof applications. It is recommended that each coat be painted perpendicular to the previous coat. It can be applied by taking into consideration the drying processes. The second and third layer should be applied after the rst layer has dried. Wait for 4 hours between two coats.