MD-Insight LLC

'POLYMER O' coloring pigment paste is designed to tint solvent borne polyvinyl chloride, polyurethane, epoxide, pentaerythritolmodified phthalic resin and other systems.

Palizh Polymer O is a high–quality paste designed for tinting materials on an organo-soluble basis. Most often it is used with the following materials:
- epoxy;
- polyurethane;
- polyvinyl chloride;
- pentaphthalic;
- silicone.

* formulations for tinting according to RAL, NCS and other color systems
* high pigment concentration
* wide range of applications

Additional compatibility checks are required en: 1K epoxies SB, 1K polyurethanes SB, 2K epoxies (up to 200 mkm layer) SB, 2K polyurethanes (layer up to 200 mkm) SB, organosilicon coatings SB, polymethylmethacrylate SB.

Colors: 28
7 - pastel
12 - decorative

COMPOSITION: Pigment, flexibilizer, functional additives.

Type of tinting: Computer tinting, Manual tinting.

Palizh tinting paste allows you to color the material yourself in the necessary colors. In the process of its application, the following procedure should be followed:

1. First mix the required amount of paste with a small amount of the base material.
2. Then add the resulting mixture to the remaining part of the base substance.
3. Mix the material until a uniform color is obtained.
4. If the color is added to a two-component mixture, then it is necessary to add it to the substance that is the main one.

It is recommended to make such a color no more than 6% of the total amount of the mixture. As a result, palizh polymer paste about 0.7 liters will give the necessary coloring to at least 11.5 liters of the base material.

Frost resistance.
Temperature mode of transportation: - 40 °C +40 °C