Nanjing Banarta New Materials Co.,Ltd

Introduction:
Prefabricated Pipe Path XPS Insulation Floorheating Distribution Panel is made from XPS Foam Board, which is a cell-closed rigid foam board with high compressive strength and very good thermal conductive. On the top of the surface, it has already Prefabricated the Pipe Path, it makes the installation much more easlier.

The thickness of XPS Foam Board could be customized. The pipe path and diameter are all customized,

It is used as an alternative to a screed type system when using water under floor heating systems. Wooden flooring or tiles can be laid directly on top without ground leveling again.

Specification:
Features Specifications
Panel Dimension 1200mm*600mm (Or custom-made according to client’s requirements)
Thickness 25mm-50mm available
Aluminum Thickness Customized according to request if needed
Applied Pipe Diameter Φ16mm (or custom-made size.10mm and 20mm are acceptable)
Thermal conductive About 0.028 W / M.K
Based board (XPS) Color Blue / Yellow / White
Compressive Strength ≥300kpa
Fire Rating B1,B2,B3
Working Temperature -30℃-80℃
Advantages:

1. Saving the pipeline laying time 50% at most.

2. Improve the working efficiency，only one labor can finish the work.

3. Strong enough for people standing on .

4. Embedded pipeline design, protect the pipeline from damage

5. No need staples during installation, avoid damage of the insulation layer.

6. Uniform pipeline laying, keep the same distance between pipes